sebelum kemana mana, perlengkapan perang yang perlu dipersiapkan adalah cisco paket tracert 5.3.3
kalo udah install, sekarang langsung ke TKP
Skema jaringan
Pertama, buat dulu skema jaringannya gan, kali ini karena salah satu sifat router yaitu router is a computer dapat dibuktikan dari pengkabelannya, kita pake cross-over yuk monggo disimak.
konfigurasi IP PC0
konfigurasi IP PC1
Konfigurasi router 0
Router>enable
Router#conf t
Router(config)#interface fa0/0 (link down)
Router(config-if)#ip address 192.168.1.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#interface fa1/0 (link up)
Router(config-if)#ip address 10.10.10.1 255.255.255.0
Router(config-if)#no shutdown
Router(config-if)#exit
Router(config)#ip route 192.168.2.0 255.255.255.0 10.10.10.2
Router(config)#do write save konfigurasi
Building configuration...
[OK]
Router(config)#
Konfigurasi router 1
Router>enable
Router#conf t
Router(config)#interface fa0/0 (link down)
Router(config-if)#ip address 192.168.2.1 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Router(config-if)#exit
Router(config)#interface fastEthernet 1/0 (link up)
Router(config-if)#ip address 10.10.10.2 255.255.255.0
Router(config-if)#no shutdown
%LINK-5-CHANGED: Interface FastEthernet1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet1/0, changed state to up
Router(config-if)#exit
Router(config)#ip route 192.168.1.0 255.255.255.0 10.10.10.1
Router(config)#do write save konfigurasi
Building configuration...
[OK]
Router(config)#
oke segitu dulu ya..
semoga bermanfaat gan
=)
atakiwa
